Saturn 1.2.09 (2023-09)
- New Feature: Larger Preview of selected file in internal file browser by pressing spacebar in template tab
Saturn 1.2.06
- IPP over USB support on Mac OS
- Saturn now also hides bonjour shared printers when adding printers, so only physical IPP printers show up.
Saturn 1.2.05
- Minimum Window size allowed 720 x 450 pixels
- Standard Window size now 1440 x 900 pixels
- Controls re-arranged to fit the new window size
Saturn 1.2.04
- Fixed a bug in nesting calculation
Saturn 1.2
- Improved printer communication
- Fixed an issue where the popupmenu for Presets would not show
- Fixed an issue with popupmenu for icc profile when none exist.
- Adds first support for Epson D500
Saturn 1.1.98
- Significantly reduced network traffic
Saturn 1.1.81
- Fixed invalid certificate
Saturn 1.1.80
- New: Prompt to rename if second queue with same name is added
- Performance: Add new printer window is more responsive now
- Fix: P800 nozzle check now alos works if queue was renamed
- Fix (Windows): UUID had an extra CR tag at the end of the name, making it not match to UUID presets
- Fix: Fixed possible corrupt ICC profiles from being downloaded from cloud
Saturn 1.1.79
- Fixed bug that could lead to a job not printing but showing the Printing icon and waiting forever
- Fixed bug that could lead to incorrect or no colour management when printing to renamed printers
- Fixed Reprint issue with renamed printers
Saturn 1.1.78
- Added support for Epson SureLab D1000
- Added missing roll widths for D1000
- Fixed freelayout size for D1000
- Added Nozzle check for D1000
Saturn 1.1.45 (2022-04-12)
- Fixed bug in large jobs processing
- Nesting now supports all roll widths correctly
Saturn 1.1.44
- Fixed Saturn logo showing in print preview FreeLayout after submitting job
- Pressing ESC will now not only not add new jobs, but should now also cancel current queued jobs
- Only allows jobs for the same printer to be nested together
Saturn 1.1.43
- Fixed bug where freelayout preview on roll printers would show with a red cross always
- Fixed Windows Preset being saved incorrectly causing it to lock and not show correct settings
Saturn 1.1.42
- No longer shows message when launching two instances of Saturn on Window but closes the later ones
- Improved Free Layout preview
- Improved too large indication Free Layout (uses correct margins)
- New FreeLayout Print method for Epson
Saturn 1.1.41
- Only kills the second Saturn when two launch simultaneously
- Shows a more exact print preview for borderless
Saturn 1.1.40
- Cloud Presets are now locked except for the paper source.
When a user changes the paper source, this setting is preserved.
All other local preset settings are always overwritten by the cloud preset value,
5 minutes after Saturn being idle, or when a manual refresh of Presets is done on Preferences
The controls are disabled for a cloud preset, and re-enabled when adding a new one or editing a non cloud preset.
- Borderless prints are cropped less and better centered.
- Fixed a bug where deleting a preset could raise an Exception error.
Version 1.1.38
- fix for all borderless prints, which did not print borderless on any size with 1.1.37
1.1.37
- The nesting method has been updated for non Epson, but still works on P800; please check P900.
- The Resume button is disabled when a job is printing.
Version 1.1.36
- Optimised IPP print code
- Fixed FreeLayout Preview colours not being properly managed
- Fixed cutmarks partially not showing
- Fixed incorrect margin preview and print for nested jobs that used non centered alignment
- Changed template cutmarks to red (they were still black)
- Reduced cutmark line width nesting (they were a little too thick)
- Uses multithreading for colour transforms (improves user experience)
- Fixed template cutmarks menu having duplicate options
1.1.35
- fix for Epson Sure Color P900
Saturn 1.1.34 is now available with the following changes;
- Improved Status query method (support up to 4 concurrent Saturns in the same network on the same printer)
- Fixes incomplete status files
- Fixes jobs never printing or going to printed after printing
- Fixes jobs failing to start if immediately going to jobs and starting one after launch
Saturn 1.1.30
- Presets updated
- ICC files indicated by Presets show correctly in Preset Editor
- Single Resolution definitions are expanded to double definitions for Windows Cloud Presets. (720dpi becomes 720x720dpi)
- Avoids preset duplication due to invalid characters in existing names.
Version 1.1.29
- Fix for incompatible preset names
Version 1.1.28
- Improved Print process, making use of maximum dynamic maximum pixel sizes, resizing if needed and submitting with double precision Exif resolution for exact measurements
- Filters preset names to avoid special characters or spaces creating unexpected issues. (was causing printer profiles to not be found)
Saturn 1.1.27 (2022-03-21)
- The German hint Preset Action did not fit (Bug 160322-01)
- The automatic update of the preset now takes place after 3 minutes of idle time and then every 1 hour. (Error 180322-02)
- Preset names are now filtered and can no longer contain characters that cause problems. (New function)
- Stopped jobs are not started even if Autostart is enabled and the jobs have been queued (error 180322-01)
Version 1.1.26
- Aligned the printer help icon to the right to keep the position correct when resizing the window (bug fix)
- The visibility of the printer status and the nozzle check is now based on the selection of the pop-up menu Printer instead of the selection of the printer list. (new function)
- Index of the printer list is reset when exiting the Printers tab (new function)
- Default is now only displayed if the printer is selected in the printer list. (new function and the reason why the index of the list is reset when leaving the "Printers" tab)
- Fixed supplies incorrectly showing as 100% full (bug fix).
Version 1.1.25
- Improved nesting of crop marks; 10mm, red and thicker (in previous versions crop marks could be lost when nesting multiple files).
- Improved procedures for adding printers and editing presets; more intuitive and with hints
- Fix presets still showing in popup after deletion and some other cosmetic issues.
- Automatically selects newly created presets
Version 1.1.24
- Updated help URLs
- The "Delete Printer" button was no longer displayed (now displayed when a printer is selected in the list)
Version 1.1.23 (2022-03-07)
- Nozzle check working again
- Preset Editor is shown when a printer is chosen in the PrinterList and the Preset chosen in the Top Preset menu is shown by default.
- When a preset is saved, or the printerlist deselected, the Preset Editor is hidden again.
- A bug was fixed in only looking at "Add New Preset" instead of the localized string. (only worked in English)
- Fixed bug of showing Preset details for the wrong printer if more printers have a Preset name that is identical
- UpDown buttons for Copies jobs Waiting now also the system icon on Mac (Light and Dark mode)
- Clicking the UpDown button for Copies in Jobs Waiting now changes the value accordingly
- Clicking a nest checkbox now automatically sets the rowindex, so that the job shows even if only the checkbox was clicked before selecting the row
- Added help button for adding printer (points to kb article and switches languages afterwards)
- Added help button for canvas length
- Added help button for Presets
Version 1.1.19 (2022-03-02)
- Full Windows 11 compatibility
- Improved responsiveness for paper size menu
Version 1.1.18
- Fix for reversed logic on template cell position sliders in certain combination of cells and images.
- Accepts all special characters in filenames
- Fix for changes in presets not always saving correctly
- Fix for printer status giving more info (like low supplies) causing print process to fail.
- Copies button (light mode) colour cast removed.
- Recognizes Windows 11 and uses different copatible printer status monitoring
- Special characters in preset names are filtered to avoid issues.
Version 1.1.10
- Fixed Borderless prints Preview shown as too large (with red X) due to double precision calculation instead of integer
- Fixed Template job showing red even if not larger than the autostart Dimensions
- Fixed jobs that are printing being put on Pause and then deleted (Printing jobs can no longer be paused)
Version 1.1.09
- Changed job icon colours
- Print button disabled during nesting
- Added up/down arrows in Copies column jobs waiting
- When deleting a printer, All S files are deleted so that they don't provide incorrect info tfor the new set of printers
- BonjourPSSetup is now embedded into Saturn Windows and launched if Bonjour is not running.
- Jobs that are Queued cannot be deleted anymore
- German and Dutch translations now informal
Version 1.1.08
- Fixed bug newly added printers bought reporting width as 0
Version 1.1.07
- Fixed Exception Error when no Printer is installed and bonjour is not running and printer tab is clicked
- Fixed backdrop of Template Editor not being cleared when Editor tab was chosen or different template was chosen
Version 1.1.06
- Added Remote Support button that downloads and launches QS
- More space for Printer name (To accomodate long name like HP Designjet T120)
Version 1.1.05
- Added license purchase by clicking a button
Version 1.1.04
- Added colour coded license information in the printer list.
- Added GPS (Gemini Profiling Service) payment url visit after printing page 2
- Changed check for IPPS to allow Mac IPPS printers to be added. (Tested on P800)
Version 1.1.03
- Improved PaperPreview FreeLayout
- Improved PaperPreview Printers tab, now showing Roll when selected.
- Automatically starts adding a printer when none was added earlier.
Version 1.1.02
- Fixed logo bug
- Fixed template bug
- Added warning for Secured IPP only printers
- Changed initial update timer to 5 minutes to avoid lag when just started (was 30 seconds)
- Added Imperial units option in Preferences.
- Fixed Roll Paper Preview (Left aligned)
- Fixed Nesting on Rolls
- Opens main page of Secured Only Printers
- RasterDPI now is set to 600 for Canon Printers if the resolution is not 600 and a Canon Printer is chosen in the printer popup menu
- RasterDPI now is set to 360 for Epson printers if the resolution is not 180, 360 or 720
- RasterDPI now is set to 300 for HP printers if the resolution is not 300 or 600
Version 1.1.00
- public release
Version 1.0.93
- Internal Browser selection reset when changing tabs
- Translation & localization updates
- WallArt prompt text colour mode aware and on top of default wallart backdrop
- When a template size is smaller than the selected sheet size, printing is prohibited, but nesting is not.
- Windows fix for jobs not moving to printed after printing
- Nozzle Test button position corrected
Version 1.0.92
- icons job statuses now GeminiTeal instead of white for better contrast.
- Target print now also shows chosen rendering intent.
- Automatic Preset installation now checks date of Preset creation, and updates the Preset (and icc profile) if the cloud Preset is newer.
Version 1.0.91
- Warning Messages for deleting printers and presets are now localized
- Presets with no ICC show the PopupMenu for ICC as empty instead of last value
- Printing a target before selecting a printer is now ignored
- Demo Printer Status logs are no longer uploaded
- Job Status is now maintained when switching tabs during printing
- Printing targets now has an additional page selection and no longer influences Saturn responsiveness
- Page control for templates now moved to bottom right next to template (new feature) (not below as that would cause issues on small monitors, as the control would be invisible
Version 1.0.90
- Fixed colours: Image Preview, Print Preview, Nesting section
- Ink status chart now draws correct background colour
- Buttons inbetween Jobs Waiting and Printed Windows now vertically aligned on open
Version 1.0.89
- Fixed silent error on non existing logo on launch
- Removing all Rectangles that made Saturn Dark even in Light mode
- Adding colours for switching dark/light mode
- Reduced width new SegmentedControl buttons (replacing tabpanel) to also work on a 1440 pixel wide display (My Asus runs on a 1440 pixel display)
- Splash screen Windows now has mask again
- Splash screen Windows only disappears after Main window is showing
Version 1.0.87
- Fix for crash after print (caused by new flashing rectangle indicating print size on paper refereincing to a no longer existing picture as the job has moved to printed)
Version 1.0.86
- Fixed Cloud Presets getting an .icc extension added to the profile name; name stored is now always without .icc extension.
- Fixed License expired message being repeated every second
- License warning is repeated when Autostart is set or a job is manually started for a printer with an expired license
- Fixed exception error when no ICC display is set.
- Saving a template with a new name sets the list index to that new template
- Fixed bug in Duplicate Cell
- Cell alignment now hidden unless a cell is selected
- Matrix now limits the number of cells to what fits; typing a larger number will set the maximum number that fits
- Added ability to create A-Z matrix, that starts with A and puts a new letter in each new cell, up to ZZ, so maximum 702 cells per template
- Template names can now be 25 characters
Version 1.0.85
- Fixed crash when loading image in FreeLayout. visiting template editor, then going back to FreeLayout and move mouse over image area. (You can still trigger Cropping, but it won't crash).
- Added wake up to PrinterList selection change instead of manual button
- Fixed bug when rotating nested job twice
Version 1.0.84
- Calculates Temperature of Display profile.
- Segmented control replacing TabPanel now shows no white line
- WaterMark is now shown on preview
- Freelayout Logo is now correctly shown with or without using edge
- Other default templates
- Old Log Files not deleted on launch
- Template point size limited to 12
Version 1.0.83
- Fix for BPC crash Mac.
- Fix for Paper size menu not being populated
- Added segmented control on top of TabPanel on windows for a clear and dark TabPanel menu
Version 1.0.82
- Small changes made to Template editor, hiding controls until they are relevant and automatically setting the papersize menu on selection.
To create a new template, the user changes the name of a template after which the New Template button appears.
if the name already exists, the button New Template is hidden.
- Keeps index to Printerlist when editing a Preset
- Added temp button to wake up P900
- BPC Save Default button now has floppy icon only
- BPC default value is now 25% instead of 50%
Version 1.0.81
- Shows correct ink levels for CUPS shared printers (tested on Mac USB connected, shared 3880)
- Busy wheel shown when adding a Cloud Preset
- Printer Query Windows now also running as workers, like on Mac
- Launches 40% faster on Windows
Version 1.0.80
- Interval based printing processes
- Special presets now get installed automatically 5 minutes after launch, if no job is printing, or tries 2 hours later.
- Removed checkbox in template list
- Prevent continuous popup about the connection if Saturn is closed before printing has been done.
- Changed target prints to work with the new printing process
- Jobs Waiting list is now only redrawn from scratch when changing tabs (losing icons for queued and printing jobs)
Version 1.0.78
- Fixed issue with incorrect user name match in Printing process.
- Waits for job to be accepted, to allow multiple Saturns using the same printer.
Version 1.0.77
- Fixed issue with multiple Saturns trying to submit jobs simultaneously
- Manual Start Jobs updated to check submission state and keep trying until success or cancel
Version 1.0.76
- Printer queries now run on a different core than the GUI
- Both AutoStart and Manual start should work, with the limitation of only one job being processed at the time (I will see if I can improve on that in a later version)
- Icons and printer copy counters show correctly
- Jobs that fail on submitting (happens on P800 sometimes) are retried until accepted. (The reason they fail is unclear, but at least I'm detecting it now)
Version 1.0.74
- New methods for tracking job status using separate processor cores for each printer, keeping GUI more responsive (except during actual IPP job submission)
- Fixed margin bug in nesting; last defined printer hardware margin was used instead of margin of the nested jobs
- Fixed nest calculation bug, causing nests to show (and print) invalid
- Fixed bug deleting nested files
- Nesting now only accepts jobs from same printer & preset
Version 1.0.73
- Off-line printers should no longer make Saturn too slow.
- Added Cancel button to Nesting menu, which also unchecks all selected nested jobs.
- After dropping a first picture on a multi-letter, multi-cell template, the other cell positions are still shown, even with BPC on.
- Add Printer button now only shows if no printer exists, or the Preset DisclosureTriangle is open.
- PaperPreview shows blue rectangle (flashing) to show job size
- Dragging files while printing is prohibited (temp fix)
- Nesting files above any job printing is prohibited (temp fix)
Version 1.0.72
- When ESC is pressed during printing, the number of copies printed is logged and the job is moved to printed.
(In Autostart this can take one copy more than when ESC was pressed)
- Forces user to stay on selected tab during job submission to avoid jobs arriving at 0 x 0 mm
- Sharpening button width increased to fit all translations
- Uses non SSL port (as P900 does not print on Saturn version 1.0.71)
Version 1.0.71
- Should now print IPPS instead of IPP. (Data sent to port 443 instead of 631)
- TargetPrint should now also work on SSL only printers
Version 1.0.70
- Canceling printing now logs jobs that were sent to the printer
- On quit, Jobs in Printing mode are logged and Jobs in Queued mode set to waiting (to avoid them showing as queued after launch)
- Saturn now sets the last used media size on launch instead of not showing until clicked
- Saturn now shows a warning when trying to print without being able to read the license state and cancels printing
- Fixed Paper preview in non-nesting mode not showing.
Version 1.0.69
- Fixed jobs not properly detected as starting to print
- Fixed nested jobs not logging
- Asks a user if a Nozzle Test has been made before printing Targets
- Checks for Special Presets 5 mins after launch and every 6 hours and prompts user to install if available.
- Improved handling of Printer/Preset/Paper change
- Nest no longer loses paper size after relaunch
- ReferencePrint job ticket timestamp now matches job (so Dimensions are shown)
- Jobs in Waiting can now be dragged to a different row to change nest order
- Nesting jobs whilst printing now shows the nested job(s)
Version 1.0.68
- Nozzle check button fixed
- UTF8 and URLencoding fixes for spaces and special characters
Version 1.0.67
- Fixes ICC management
Version 1.0.66
- Now also nests templates
- Shows nested mediaSize
- Updates nest correctly when Mediasize is changed
- Warns when a selected job in a nest does not fit and then switches off nest
- Fixed incorrect reference to SheetSize when job was selected in jobs waiting.
- Remembers nest selection when rotating a nest job and updates nest correctly
- Switches off nesting when changing tabs
- Nested jobs now show green when matching media size and print perfectly centered
Version 1.0.65
- Refining Nesting
- Added CutMarks
- Added Multiple row selection support for nesting
- Job now added and selected ones moved to trash
- TargetPrint now uses 2 lines for parameters
- Fixed double icc extension issue for ReferencePrint
- Margins now hardware determined
- Uses SheetSize selected in top popup
- Generates an actual nest job
- Removes jobs from which nest was created after creating the nest job
Version 1.0.64
- Adding controls for nesting (conceptual)
- implemented left and right aligned Sheet nesting
Version 1.0.63
- CloudPresets added
- Target prints now write settings on print for consistent ICC profiling names
- Fixed bug of ink levels showing at 100% for all inks
- Closes DisclosureTriangle when Preset is saved
- New targets embedded with readable numbers and characters
- Fixed bug in ICC profile download (Cannot use special characters, only use _ in icc file names)
- Supports both Gemini and UUID presets and profiles.
Version 1.0.62
- Fix for multiple files in queue only printing one
Version 1.0.61
- Re-written Autostart to work on both Windows & Mac
Version 1.0.59
- Intelligent sharpening added with settings Off, Low, Med or High
Version 1.0.58
- Limited support for Cups shared printers (tested with 3880 and prints, but media numbers instead of names, no paper source, and no centering of prints)
- Shows copy printing also in Autostart mode
- Forbids editing copies of jobs that are printing
Version 1.0.57
- Fix for multiple copies indication and P900 nozzle print
Version 1.0.56
- Implemented Nozzle Check for SC-P800 and SC-P900
- Creates Stats report on exit
Version 1.0.55
- Position Print button changed
- Shows ink names when hovering over ink chart as a tool tip when a printer is selected (keeps the interface clean)
- Hides Preset menu when switching to FreeLayout or Template
- Fixes Printer Pagecounter not working on Windows
- Reads pagecounters from all printers on exit
Version 1.0.54
- Fixed job not shown as printing in Waiting list after switching tabs.
- Prevents jobs that are printing to be deleted.
Version 1.0.53
- Job that is printing cannot be deleted whilst printing
- Reprinted jobs are logged as new prints
- After switching back to Printers tab, the job Printing will show the Printing icon (and cannot be deleted)
Version 1.0.52
- No longer shows popup message when a demo user job is automatically logged in
- Preset is now shown in PrintJob log instead of MediaType reported by Printer.
Version 1.0.51
- Sorts Printed jobs with newest file on top
- Double warning when Deleting a Preset
- Double warning when removing a printer
Version 1.0.49
- Fixed FreeLayout not resulting in correct size in Queue (and print)
- Fixed Sorting Printed jobs not sorting correctly
- Fixed not being able to change a Template Letter
- Added ability to change the number of copies of a job in Waiting (range 1-99)
Version 1.0.48
- Fixed colored lines in FreeLayout outside of picture size
- Fixed Landscape files not printing correct on printers with AutoRotate(!)
Version 1.0.45
- Adding a job with an edge or crop now resets to saturn logo afterwards
- ReferencePrint now works and uses set BPC value for chosen media, which is added to the printed information as well as the used ICC profile.
Version 1.0.44
- Top menu adjusted to fit German labels
- Hidden Remote Printing section in Preferences (as not yet implemented)
- Hidden Template infoLabel point size (Temporary fix as value isn't retained properly)
- Saturn Logo shown after adding file to queue in FreeLayout
Version 1.0.43
- Win: Fixed adding one printer resulting in two listed and a crash
- Win: Targets not printing (wasn't implemented for Windows in 1.0.42)
- Win: Listbox Printers right edge no longer cropped
- Win: Printer icon now showing on correct background colour
- Win: Relaunching no longer adds a "-" printer
- Win: Preferences tab no longer shows in Caps when Printer tab is selected.
- Win: Internal browser bug causing subfolders not to show correctly
- Win: Now also prohibits adding the same printer twice in Windows
- Win: Template Memo label now White instead of Black
Version 1.0.42
- User gets a prompt to renew the license when the license expired within a week.
- Fixed Papersize menu being empty on launch
Version 1.0.41
- Now sets preset menu to first option after printer has been analysed on launch to disable ProgressWheel
Windows:
- Fixed path.txt being created and causing error when job is deleted
- First version that uses embedded IPP code (no need to install IPP to add Printer)
- Will show printer was already added (only if printer IP is listed in cell 0 of the printerlist)
- Shows printer status using embedded IPP
- Prints using embedded IPP
- Template filter label now white instead of black
- Adjusted size popupmenus to make them fit on 1440×900 pixels
- Fixed templates not showing up
Version 1.0.40
- Rotation now easier to reset and can also be reset by clicking on the rotation label above the slider.
- Highlighting a printer no longer resets selected papersize in top section
- Room names now shown again in WallArt
- Light grey rectangle no longer drawn under WallArt view
- Add Printer window now centered under Add Printer Button.
- Cropping shows correct Print Preview, (no print preview until crop is applied)
- Disabled Rotate button for Multipage PDF files (Quick fix; will eventually allow rotation)
- Fixed double rendering issue when PDF file is clicked in FreeLayout
- Fixed Label Point size restoring to 24 instead of last set default value
- Fixed Browser Tree View not sorting alphabetically when sorting order for files was set to date
- Fixed visiting Template or Template editor and then switching to WallArt showing White WallArt (Quick fix; might eventually support Templates for WallArt)
- Fixed first image clicked in Internal browser on FreeLayout not showing file Dimensions and resolution
- Start of Windows Support:
- Fixed overlay mask missing
- Fixed Mac Slider control declare not needed on windows
Version 1.0.36
- Now shows printers offline without spinning wheel. (Status take a little longer to show as a side effect)
- Status updates now all done in the background (no spinning colour wheels)
- Fixed Autostart not actually starting when queueing jobs and then starting
- Icons in Joblist made smaller
- TabPanel now disabled during adding to queue to avoid issues.
- Label PDF pages changed to show full amount of pages (still limited to 100 pages)
- Fixed Template filter showing underscore for typed characters
- Added label that shows how many templates are shown of the total available number
- Font size internal browser reduced
- Internal Browser now sorts by date by default
Version 1.0.35
- Esc key now cancels autoprint modes (for all printers) and manually started prints that got "stuck" because of a printer issue.
- Manually printed job now gets correct Printed date/time stamp.
- Autostart now can be switched on for an empty queue and will start printing even when the printer TabPanel is not selected.
- Jobs now stay in Jobs Waiting until printing is finished.
- Reprinted jobs are now set to "Waiting".
- Printer status label (under printer icon) removed
Version 1.0.34
- Fixed using Preset name rather than Model to retrieve presets causing a crash
- Fixed Last used Printer in some cases not being selected on launch
- Fixed Autostart not working on renamed printers.
- Fixed jobs queued for Autostart not showing Queued status
- Fixed interface being sluggish during autoprint
- Fixed Auto Printed date/time not being set correctly
- Fixed Manual Print not setting job icon to Printing
Version 1.0.33
- Last used Printer, Preset and Media now saved and restored on launch
- ProgressWheel now shows Saturn is still loading
- Added Autostart Checkboxes to Printers
- Fixed incorrect Landscape Template rotation on even pages
- Fixed switching back to Template losing template preview.
- Made Print status "sticky
- Reprint now puts printstatus back to "Waiting".
- Possible fix for Epson WP-4025
Version 1.0.32
- Fix for borderless A4
Version 1.0.31
- Colors updated for Light Mode
- Alternate row colours (dark) in Printers, Jobs waiting and jobs Printed
- Printer, Preset and Paper now colour Red when not selected, green when selected.
Version 1.0.30
- Autoupdate version: same as 1.0.29
Version 1.0.29
- Fixed Internal Browser not showing all folders/files. (To show newly added folder contents, close and re-open arrow)
- Enter key on Width, Height or DPI field in FreeLayout now updates correctly
- Added a special fix for P800 for size difference in PrintCustomIPP
Version 1.0.28
- Landscape templates printed on sheets now automatically rotated during submmission
- Fix for HP not printing correct orientation for Square images FreeLayout
- For Templates, the image needs to be cropped by 2x the defaultmargin on both sides, whilst leaving the media size to the page size. (21000×29700 for A4)
Version 1.0.27
- Prints 2 targets instead of just the 1st target.
- Uses the selected page size to control the Add to Queue button
Version 1.0.26
- The ICC pop-up is now updated to all available profiles when clicked.
- Localised
Version 1.0.25
- Print preview now simulates borderless in the print preview
- When rotating a job, the job selection is no longer lost
- Only jobs that fit or match can be printed (the "Start" button is otherwise disabled)
- Fixed a bug in the conversion of the dimensions for 10×15 and 13×18
- Fixed error after printing (Required code to handle job errors and move the job to "Printed" before completion).
- The preview now shows a red X if the size cannot be printed on the selected medium.
- Fixed various errors at the first start
Version 1.0.24
- First version to use an asynchronous printing process.
- Larger window size for print preview
- Print preview on FreeLayout to show how FreeLayout will print
- Print preview for rolls and sheets in FreeLayout as well as in the tab sheet "Printer
Version 1.0.23
- Fixed Incorrect crop for square cell with portrait image and vertical offset (to show the header).
- Fixed incorrect cropping for square cell with landscape image and horizontal offset (Crop horizontally correctly)
- First queue management for AutoStart:
- isBusy added for each printer and Autostart takes this status into account before printing a new job
- Orange colour added to the printer name when it prints
- Jobs are now also started automatically if the user does not switch to the printer TabPanel
- Now also shows a preview for jobs selected in the Printed list to make it easier to select reprints
Version 1.0.22
- Fixed incorrect displacement of buttons when resizing the window
- Autostart button made functional (based on pop-up menu of loaded media)
- Prints multiple copies automatically and waits until printing is finished.
Version 1.0.21
- New logo
- Retrieves the single sheet and roll information and displays the correct colour
- Output preview is now hidden when the job is not selected
- Status is retrieved once when Maxwidth or MaxHeight is zero
- Improved colour warnings Sizes.
- Media size lists tidied up
Version 1.0.20
- Templates are no longer copied.
- Tested with large print formats: FreeLayout now also uses Auto.
Version 1.0.19
- The print dimensions of the template and the free layout were checked for accuracy on the P800.
- Added an output preview for the selected job.
Version 1.0.18
- Template list is now filled on start-up
- Server path references removed
- Fixed several bugs in the template editor
Version 1.0.17
- No longer rotates jobs in landscape format without icc on scrolls
- Prints landscape jobs correctly as long as the height is at least the minimum height (203 mm for HP 4000)
- Assistance with the first start.
Version 1.0.16
- Waiting orders are now sorted by creation date (the oldest order is on top)
- Splash mask corrected
- Print destinations" button added
- X451 now also prints from the main tray (was a printer error, restarting the printer fixed this)
Version 1.0.15
- Imperial SheetSizes now converted to mm
- Added "Rotate" button for jobs waiting with the right CMM
Version 1.0.14
- Centres FreeLayout prints on the selected page
- Landscape format pictures are no longer rotated automatically
- Multiple copies of a job are printed correctly
- Saturn branding completed
- FreeLayout dimensions are now checked against the media size selected for the selected printer
- JobsWaiting are now checked against the selected media size and show incompatible jobs
Version 1.0.13
- Server-related controls removed
- Obsolete code updated (all but 32 warnings)
- Interface tidy
- Now shows job dimensions on first click in the FreeLayout Finder list
- Clicking on a loaded image in FreeLayout no longer removes the BPC simulation
- Removing an image from FreeLayout by pressing the backspace key now deactivates printing
Version Saturn 1.0.12
- First Saturn version
- Prints even without selected ICC profile
